Skip to main content

Hot Melt Dispensing

with VERMES Microdispensing Jet Valves

The MDS 1560 Hot Melt Dispensing System

 

from VERMES Microdispensing has been specially designed for dispensing hot glue, also known as hot melt adhesive.

  • Perfect Solution for all types of Hot Melt Applications
  • Designed for Hot Glue Adhesives Dispensing
  • Ideal for Electronic Manufacturing
  • Freely adjustable Parameter Settings
  • Complex Pattern Dispensing Options
  • Highest Media Life Preservation

Hot melt is a thermoplastic adhesive that changes its solid state to liquid when passing through the zones of increasing temperature. 

Hot melt applications are getting more and more popular in electronic industry, e.g. for bonding smart phone displays.

 

Major Advantage:

 

The VERMES Microdispensing Hot Melt System is an optimal solution for the dispensing of polyurethane-based hot melt adhesives.

In combination with the cartridge heater and nozzle heater the system can precisely adjust to the requested temperature.

The system is powered by DST – Dynamic Shockwave Technology – which optimizes the valve's yield for the most perfect dispensing results allowing the dispensing valve to operated with extremely fast opening and closing cycles. The precise setting of stroke and force enable to dispense hot glue in ultra-fine dots/lines.

Freely adjustable parameter settings facilitate the customization of the jet properties to the respective requirements and fluid properties. The electronic control unit allows the change of the dispensing parameters without delay.

The hot melt cartridge cylinder reduces heating up time and cartridge changing time to receive optimum heating and humidity adjustments and optimized preservation of hot melt life.

 

Recommended Media:

 

The system provides a perfect solution for all types of hot melt adhesives, for example 3M, Henkel, Fuller glues.

Application Examples:


  • The system is ideal for the electronic industry, e.g. for bonding electronic gadgets, smart phone components, 3D MID (Molded Interconnect Device) and PCB (Printed Circuit Board).
  • It is also perfect as Dam and Fill dispensing techniques for VHD (Very High Dam) applications.
  • The variously programmable controller allows to dispense complex patterns, such as drop-on-drop and drop-on-fly dispensing.
  • The precise cutoff and accurate dispensing makes it a preferred solution for intermittent adhesive coating applications.

VERMES Microdispensing GmbH
Headquarters
Rudolf-Diesel-Ring 2
83607 Holzkirchen
Germany
Phone: +49 (0)8024 644-0
info (at) vermes.com

 

VERMES Microdispensing India Pvt. Ltd.
No. 1914, 40th Cross
Royal County Jambusavari Dinne Main Road
8th Phase J.P. Nagar
Bengaluru - 560078, India
Phone: +91 (0) 96630 49944
india (at) vermes.com

 

VERMES Microdispensing (Xiamen) Co., Ltd.
Office 601-C1, Rihua Int. Building, No.16
Xinfeng 3rd Road, Torch Hi-Tech Park
Huli district, 361000 Xiamen City
PR China
Phone: +86 (0)592-7257233
china (at) vermes.com

 

VERMES Microdispensing Sdn Bhd
No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
malaysia (at) vermes.com

VERMES Microdispensing America Inc.
US Headquarters:
8510 Warner Road,
Suite 100, Plain City,
OH 43064, USA
Phone: +1 408 520-2555
america (at) vermes.com

 

VERMES Microdispensing America Inc.
Branch office:
2226 Ringwood Ave
San Jose, CA 95131
USA
Phone: +1 408 520-2555
america (at) vermes.com

VERMES Microdispensing Ltd.
#401, Bucheon TechnoPark 403
655, Pyeongcheon-Ro, Bucheon-Si
Gyeonggi-Do
Korea
Phone: +82 (0)32-246-1500
korea (at) vermes.com