Any Questions?

VERMES Microdispensing GmbH

Palnkamer Str.18
83624 Otterfing
Germany
Phone: +49 (0)8024 644 - 0
E-Mail: info(a)vermes.com

VERMES Microdispensing
America Inc

2226 Ringwood Ave.
San Jose, CA 95131
USA
Phone: +1 408 520-2555
E-Mail: america(at)vermes.com

VERMES Microdispensing
(Xiamen) Co., Ltd.

Room 601/C1, Rehua Building, No.16
Xinfeng 3rd Road, Huoju Hi-Tech Zone
Huli district, Xiamen City
PR China
E-Mail: info(at)vermes.com

VERMES Microdispensing
(Malaysia) Sdn Bhd

No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
E-Mail: info(at)vermes.com

Micro Dispensing System - MDS 3200+ Series

Piezo valve for jetting high viscous fluids with up to 2.000.000 mPas. Nonstop operation with up to 1000 Hz possible. High process stability and flexibility thanks to modular design. Low total cost of ownership (TCO).

Mode of Operation:

Every VERMES Microdispensing valve contains a piezo of the latest generation, which is activated by a control unit for the dispensing process. With each impulse the piezo opens and closes a nozzle with a tappet. The tappet is connected via a sophisticated lever system with the piezo stack and transfers the full power of the piezo to a dispensing medium, which flows under pressure towards the nozzle. Because of the extremely fast and precise up and down movement of the piezo, several hundred shots can be dispensed within a second, and this with very high repeatability precision. In contrast to the low and medium viscosity systems, the MDS 3200A is open when in nonoperating state (Normally Open).

Advantages:
Fast:Opening and closing of the valve for max needle lift with more than 3000 Hz, nonstop operation with up to 1000 Hz.
Versatile:Freely adjustable parameter settings allow to customize the jet properties to the dispense fluid properties.
 
Electronic control unit allows change of dispensing parameters without delay.
 
Also compatible for low or medium viscous media (if the tappets are switched often or if the dispensing amounts are very small).
Precise:High repeatability of drop-to-drop dispensing volume for media of all viscisities. Dispensing into cavities, grooves and irregular surfaces. 
Powerful:Converting the force of the latest generation piezo through sophisticated mechanics, the system can jet highest viscosity media with pressures of up to 1.000 bar.
Flexible:The modular design of the MDS 3200A allows user defined configurations for various applications. You can adjust the same system to very different process and fluid parameters with the exchange of just a few parts.
 
You can use a number of different nozzle units for a wide range of media and dot sizes.
 
For the optimum performance it is possible to choose from different tappet geometries.
 
You can choose from several different component materials, which allows for virtually unlimited media compatibility.
Micro Dispensing Valve  Micro Dispensing Controller
MDV 3200AMDC 3200+

 

 

 

Any Questions?

VERMES Microdispensing GmbH

Palnkamer Str.18
83624 Otterfing
Germany
Phone: +49 (0)8024 644 - 0
E-Mail: info(a)vermes.com

VERMES Microdispensing
America Inc

2226 Ringwood Ave.
San Jose, CA 95131
USA
Phone: +1 408 520-2555
E-Mail: america(at)vermes.com

VERMES Microdispensing
(Xiamen) Co., Ltd.

Room 601/C1, Rehua Building, No.16
Xinfeng 3rd Road, Huoju Hi-Tech Zone
Huli district, Xiamen City
PR China
E-Mail: info(at)vermes.com

VERMES Microdispensing
(Malaysia) Sdn Bhd

No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
E-Mail: info(at)vermes.com

VERMES Microdispensing > Micro Dispensing Systems > MDS - Micro Dispensing Systems > Micro Dispensing System - MDS 3200+ Series >