Any Questions?

VERMES Microdispensing GmbH

Palnkamer Str.18
83624 Otterfing
Germany
Phone: +49 (0)8024 644 - 0
E-Mail: info(a)vermes.com

VERMES Microdispensing
America Inc

2226 Ringwood Ave.
San Jose, CA 95131
USA
Phone: +1 408 520-2555
E-Mail: america(at)vermes.com

VERMES Microdispensing
(Xiamen) Co., Ltd.

Room 601/C1, Rehua Building, No.16
Xinfeng 3rd Road, Huoju Hi-Tech Zone
Huli district, Xiamen City
PR China
E-Mail: info(at)vermes.com

VERMES Microdispensing
(Malaysia) Sdn Bhd

No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
E-Mail: info(at)vermes.com

Micro Dispensing System - MDS 3200+F Series

Mode of Operation:

The MDS 3200+F differs from the MDS 3200A through an added adjusting screw, which limits the needle lift mechanically - independant from the piezo. This enables the system to access the maximum system power even with limited tappet movements. At the same time it is fully compatible with all the component parts of the MDS 3200A and retains the same wide range of functionalities and potential dispensing media.

Advantages:
Fast:Opening and closing of the valve for max needle lift with more than 3000 Hz, nonstop operation with up to 1000 Hz.
Versatile:Freely adjustable parameter settings allow customizing the jet properties to the dispense fluid properties. Electronic control unit allows change of dispensing parameters without delay. Also compatible for low or medium viscous media (if the tappets are switched often or the dispensing amounts are very small).
Precise:Application of very small dots with low droplet diameters, but still reproducible amounts of dispensed medium. Software enhanced parameter finding guarantees the reproducibility of dispensing results and uncomplicated operation by the user. This is true even for systems in parallel assignment.
Powerful:Converting the force of the latest generation piezo through sophisticated mechanics, the system can jet highest viscosity media with pressures of up to 1000 bar.
Flexible:The compact build of the valve with variable cable connections allows its use even under difficult conditions with limited space. The system is fully compatible with the whole range of component parts of the established MDS 3200A, including nozzle inserts and other parts in contact with the dispense media. Therefore the MDS 3200+F has the same functionality as the MDS 3200A. 
 
You can use a number of different nozzle units for a wide range of media and dot sizes. For the optimum performance it is possible to choose from different tappet geometries as well.
 
You can choose from several different component materials, which allows for virtually unlimited media compatibility.
Micro Dispensing ValvesMicro Dispensing Controller
MDV 3200FMDC 3200+

 

 

 

Any Questions?

VERMES Microdispensing GmbH

Palnkamer Str.18
83624 Otterfing
Germany
Phone: +49 (0)8024 644 - 0
E-Mail: info(a)vermes.com

VERMES Microdispensing
America Inc

2226 Ringwood Ave.
San Jose, CA 95131
USA
Phone: +1 408 520-2555
E-Mail: america(at)vermes.com

VERMES Microdispensing
(Xiamen) Co., Ltd.

Room 601/C1, Rehua Building, No.16
Xinfeng 3rd Road, Huoju Hi-Tech Zone
Huli district, Xiamen City
PR China
E-Mail: info(at)vermes.com

VERMES Microdispensing
(Malaysia) Sdn Bhd

No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
E-Mail: info(at)vermes.com

VERMES Microdispensing > Micro Dispensing Systems > MDS - Micro Dispensing Systems > Micro Dispensing System - MDS 3200+F Series >