Any Questions?

VERMES Microdispensing GmbH

Palnkamer Str.18
83624 Otterfing
Germany
Phone: +49 (0)8024 644 - 0
E-Mail: info(a)vermes.com

VERMES Microdispensing
America Inc

2226 Ringwood Ave.
San Jose, CA 95131
USA
Phone: +1 408 520-2555
E-Mail: america(at)vermes.com

VERMES Microdispensing
(Xiamen) Co., Ltd.

Room 601/C1, Rehua Building, No.16
Xinfeng 3rd Road, Huoju Hi-Tech Zone
Huli district, Xiamen City
PR China
E-Mail: info(at)vermes.com

VERMES Microdispensing
(Malaysia) Sdn Bhd

No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
E-Mail: info(at)vermes.com

Frequently Asked Questions

Dispensing and Jetting in General

What is “contactless dispensing“?

What is „microdispensing“?

What is a jet valve?

What are the advantages of "jetting" over contacting dispensing methods?

What are low, medium and high viscous fluids and which systems are suitable?

When to use a VERMES series "MDS 3000" jet valve?

What do MDS, MDV, MDC and MDF stand for?

Which systems comprise the MDS 3000 Series?

What do the suffixes –FD and –FA signify with the systems MDS 3010A and MDS 3020A?

What is a nozzle insert? What is a nozzle unit?

What is a fluid box?

How do I assemble a system for my dispensing needs?

Why there is required two cables in one valve?

What are the standard cable lengths?

What is Adjusting?

What are RI, FA, OT, NL, DL and NP?

What is the difference between supply pressure and dispensing pressure?

Does the supply pressure affect the dispensing result?

The system has been assembled correctly, the adjust has been done, the supply pressure is on, but there is no drop tear-off, although the valve is obviously opening and closing. What have I done wrong?

What is the distance between nozzle and substrate?

Do I need a heater?

How do I clean the dispensing system?

How can I calculate the cycle time respectively the throughput rate when I project my automatic machine?

Which interfaces can be used to integrate the dispensing system in the automatic machine?

Which interface does VERMES recommend for operating with automatic machines?

Which modes of operation can be selected for controlling a MDS with an automatic machine?

Any Questions?

VERMES Microdispensing GmbH

Palnkamer Str.18
83624 Otterfing
Germany
Phone: +49 (0)8024 644 - 0
E-Mail: info(a)vermes.com

VERMES Microdispensing
America Inc

2226 Ringwood Ave.
San Jose, CA 95131
USA
Phone: +1 408 520-2555
E-Mail: america(at)vermes.com

VERMES Microdispensing
(Xiamen) Co., Ltd.

Room 601/C1, Rehua Building, No.16
Xinfeng 3rd Road, Huoju Hi-Tech Zone
Huli district, Xiamen City
PR China
E-Mail: info(at)vermes.com

VERMES Microdispensing
(Malaysia) Sdn Bhd

No.11, Jalan Sungai Dua Utama 1
Taman Sungai Dua Utama
13800 Butterworth, Penang
Malaysia
Phone: +60 4 358 0996
E-Mail: info(at)vermes.com